Hey ! Sorry for the sporadic posts off late, I've been busy with other things while looking out for new ideas to share.... Here's one I hope you'll enjoy, and if it inspires you to do the same, I'd be happy to hear from you !
I have a soft corner for antique looking furniture and since I love having guests over, I'd been looking for a rustic table for quite some time. Unfortunately, the ones that suited my taste were very expensive, even second hand.
Since I didn't find it worth buying 'ready made', I decided to make my own.
After checking out a few DIY dining table videos on Youtube I was ready to get started.
For the Bangaloreans readers, I got the reclaimed pine wood at the Bamboo Bazaar in Shivajinagar for 36 rs/kg, including the cutting and planing. I wanted a comfortable six seater, that could be extended to an eight seater with two additional chairs on the ends, so I took boards that amounted to a 6*3 feet surface, to which I added the wood for the frame and the strong feet to maximise the stability.
I got some wood screws at the hardware store, as well as a wood saw, file, and sand paper because the cutting they'd done at Bamboo bazar was very approximate, to say the least. I also bought some corner clamps to fix the top boards to the frame from underneath, because I didn't want any screws to be visible.
Last but not least, the visible iron corners are from Thar, a furniture shop right opposite EGL (Domlur), I love the antique touch they add!
I started by fixing the frame and feet together with screws and after the base was assembled and approved by the cat, I could move on to the top surface.
I proceeded to screw the top boards together to the central support. For that I used a belt to tighten them as much as possible so as to avoid gaps on the table... The belt suffised for the first few boards, after which I had to get a little creative with laundry wires and wood blocks for the tightening...
When I was ready to fix it all together I placed the frame, upside down, on top of the assembled boards and screwed each board to the frame using the metallic corners. I didn't have a C-clamp then, but I'd higly recommend you to get one for this step. Instead, I used my UPS battery for weight, again to minimise the gaps between the top board and frame. This monster was so heavy it was nearly impossible to maneuver, yet the stubborn girl that I am managed it somehow, but honestly, never again !
Not to mention that when my husband got home he panicked and told me that the battery was full of sulfuric acid that would burn my skin if it leaked... You know that 'Oops' moment? Yeah... I had no idea...
So I can't insist enough, get a C-clamp !! If you have one you'll have to put everything right side up and screw from under the table because you can't fix the clamp if it's on the floor like here.
Once it was all steady and strong on it's four feet, I filed the edges to make sure everything was aligned and sanded the entire table. Now this is what I call serious arm workout, I felt it for days !
I then stained it for a darker finish using Danish oil black walnut. This protects the wood as well and nourishes it deeply. Once it had sinked in for about an hour, I wiped off the excess oil with a dry cloth and let it dry overnight.
After a few hours spread throughout the week, and a total of about INR 3500 spent, the table was ready for guests :D
Bon appétit à tous !